Revista:
POWDER METALLURGY
ISSN:
0032-5899
Año:
2021
Vol.:
64
N°:
4
Págs.:
331 - 340
Different approaches to take advantage of powder metallurgy in the manufacturing of diamond-impregnated components were studied. Three different powders were used as starting materials; two pre-alloyed powders, based on Fe-Cu and Fe-Cu-Sn systems, and one pre-mixed Fe-based powder. Different manufacturing routes as a strategy to obtain tailored mechanical properties were studied, with the influence of alloying elements such as graphite, iron phosphide and Mn-Ni-B master alloy to reinforce the iron-based powders. Both uncoated and coated commercial synthetic diamonds were introduced in the systems to analyse the surface reactions that depend on both metallic matrix and processing parameters. Hardness values from 88 to 105 HRB were obtained with a wide range of transverse rupture strength values from 1250 to 1640 MPa. An appropriate combination of metallic matrix, alloying elements and processing parameters makes the materials analysed here suitable powders for the manufacturing of diamond-impregnated tools.
Revista:
MATERIALS
ISSN:
1996-1944
Año:
2020
Vol.:
13
N°:
5
Págs.:
1081
Sodium alginate, a biopolymer extracted from brown algae, has shown great potential for many applications, mainly due to its remarkable biocompatibility and biodegradability. To broaden its fields of applications and improve material characteristics, the use of nanoreinforcements to prepare nanocomposites with enhanced properties, such as carbonaceous structures which could improve thermal and mechanical behavior and confer new functionalities, is being studied. In this work, graphene oxide was obtained from graphite by using modified Hummers' method and exfoliation was assisted by sonication and centrifugation, and it was later used to prepare sodium alginate/graphene oxide nanocomposites. The effect that different variables, during preparation of graphene oxide, have on the final properties has been studied. Longer oxidation times showed higher degrees of oxidation and thus larger amount of oxygen-containing groups in the structure, whereas longer sonication times and higher centrifugation rates showed more exfoliated graphene sheets with lower sizes. The addition of graphene oxide to a biopolymeric matrix was also studied, considering the effect of processing and content of reinforcement on the material. Materials with reinforcement size-dependent properties were observed, showing nanocomposites with large flake sizes, better thermal stability, and more enhanced mechanical properties, reaching an improvement of 65.3% and 83.3% for tensile strength and Young's modulus, respectively, for a composite containing 8 wt % of graphene oxide.